SECURITY HORN ASSEMBLY INSTALLATION

INSTALL REAR SEAT SIDE GARNISH RH

1. Engage the 6 claws and 2 clips, and install the rear seat side garnish RH.

INSTALL REAR DECK TRIM COVER

1. Engage the 10 claws and install the rear deck trim cover.

   Note

   After installation, make sure that the back door weatherstrip does not interfere with the rear deck trim cover.

INSTALL REAR NO. 1 FLOOR BOARD

1. Engage the 2 claws, 2 clips and 3 guides.

2. Install the rear No. 1 floor board with the bolt.

INSTALL DECK BOARD SUB-ASSEMBLY

1. Engage the 3 claws and 3 clips to install the deck board sub-assembly.

INSTALL BATTERY BOX COVER

1. Engage the 3 guides to install the battery box cover.

INSTALL REAR DECK FLOOR BOX

1. Install the rear deck floor box.

INSTALL REAR FLOOR MAT

1. Install the rear floor mat.

INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY

1. Engage the 2 pins.

2. Connect the 2 suspenders and install the package tray trim panel assembly.

INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

1. 

   Text in Illustration

   *1	Alignment Mark (White)

   Align the alignment mark (white) on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and install the rear door opening trim weatherstrip RH.

   Note

   After installation, check that the corners fit correctly.

INSTALL REAR SEAT INNER BELT ASSEMBLY RH

1. 

   Text in Illustration

   *a	Protective Tape

   Install the rear seat center outer belt assembly, rear seat inner belt assembly RH, and washer with the bolt.

   Torque:

   41 N*m  { 420 kgf*cm, 30 ft.*lbf }

   Note

   Do not allow the anchor part of the rear seat inner belt assembly to overlap protruding parts of the floor panel.

INSTALL REAR SEAT ASSEMBLY RH

1. Place the rear seat assembly RH in the cabin.

   Note

   Be careful not to damage the vehicle body.

2. Install the rear side of the rear seat assembly RH with the 2 bolts.

   Torque:

   37 N*m  { 377 kgf*cm, 27 ft.*lbf }

3. Install the front side of the rear seat assembly RH with the 2 bolts.

   Torque:

   37 N*m  { 377 kgf*cm, 27 ft.*lbf }

INSTALL NO. 2 REAR SEAT CUSHION HINGE COVER

1. Engage the 4 claws and install the No. 2 rear seat cushion hinge cover.

INSTALL NO. 1 REAR SEAT CUSHION HINGE COVER

1. Engage the 4 claws and install the No. 1 rear seat cushion hinge cover.