ELECTRICAL KEY OSCILLATOR (for Rear Side) INSTALLATION

INSTALL REAR SEAT ASSEMBLY LH

1. Place the rear seat assembly LH in the cabin.

   Note

   Be careful not to damage the vehicle body.

2. Install the rear side of the rear seat assembly LH with the 2 bolts.

   Torque:

   37 N*m  { 377 kgf*cm, 27 ft.*lbf }

3. Install the front side of the rear seat assembly LH with the 2 bolts.

   Torque:

   37 N*m  { 377 kgf*cm, 27 ft.*lbf }

INSTALL NO. 1 REAR SEAT CUSHION HINGE COVER

1. Engage the 4 claws and install the No. 1 rear seat cushion hinge cover.

INSTALL NO. 2 REAR SEAT CUSHION HINGE COVER

1. Engage the 4 claws and install the No. 2 rear seat cushion hinge cover.

INSTALL REAR SEAT INNER BELT ASSEMBLY RH

1. 

   Text in Illustration

   *a	Protective Tape

   Install the rear seat center outer belt assembly, rear seat inner belt assembly RH, and washer with the bolt.

   Torque:

   41 N*m  { 420 kgf*cm, 30 ft.*lbf }

   Note

   Do not allow the anchor part of the rear seat inner belt assembly to overlap protruding parts of the floor panel.

INSTALL REAR SEAT ASSEMBLY RH

1. Place the rear seat assembly RH in the cabin.

   Note

   Be careful not to damage the vehicle body.

2. Install the rear side of the rear seat assembly RH with the 2 bolts.

   Torque:

   37 N*m  { 377 kgf*cm, 27 ft.*lbf }

3. Install the front side of the rear seat assembly RH with the 2 bolts.

   Torque:

   37 N*m  { 377 kgf*cm, 27 ft.*lbf }

INSTALL NO. 1 REAR SEAT CUSHION HINGE COVER

1. Engage the 4 claws and install the No. 1 rear seat cushion hinge cover.

INSTALL NO. 2 REAR SEAT CUSHION HINGE COVER

1. Engage the 4 claws and install the No. 2 rear seat cushion hinge cover.