GLASS BREAKAGE SENSOR ECU INSTALLATION


  1. INSTALL GLASS BREAKAGE SENSOR ECU ASSEMBLY


    1. Install the glass breakage sensor ECU assembly with the screw.

      Note

      Do not install the glass breakage sensor ECU assembly if it has been damaged or impacted in any way.

    2. Connect the connector.

  2. INSTALL AIR CONDITIONING CONTROL ASSEMBLY


    1. Connect the connector.

    2. Engage the 4 clips and install the air conditioning control assembly.

  3. INSTALL RADIO RECEIVER OPENING COVER WITH BRACKET (w/o Radio Receiver)


    1. Install the radio receiver opening cover with bracket with the 4 bolts <K>.

  4. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (except Radio Receiver Type)


    1. Engage the 4 clips and install the center instrument cluster finish panel sub-assembly.

  5. INSTALL RADIO RECEIVER WITH BRACKET (for Radio Receiver Type)


    1. Connect each connector.

    2. Engage the 4 clips.

    3. Install the radio receiver with bracket with the 4 bolts.

  6. INSTALL RADIO AND DISPLAY RECEIVER WITH BRACKET (for Radio and Display Type)


    1. Connect each connector.

    2. Install the radio and display receiver with bracket with the 4 bolts.

  7. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL


    1. Engage the 4 claws and 6 clips.

    2. Install the lower center instrument panel finish panel with the 2 screws <E> or <F>.

  8. INSTALL UPPER CONSOLE PANEL


    1. Engage the 7 claws and install the upper console panel.

  9. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    1. Connect the connector.

    2. A003U5ME03

      Engage the 3 guides, 5 claws and 2 clips, and install the center instrument panel register assembly.

  10. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. A003SDS

      Engage the 4 clips and install the instrument panel finish panel end LH.

  11. INSTALL INSTRUMENT PANEL FINISH PANEL END RH


    1. A003ROO

      Engage the 4 clips and install the instrument panel finish panel end RH.

  12. INSTALL REAR CONSOLE BOX COVER


    1. Connect the connector.

    2. Engage the 2 guides and 4 clips to install the rear console box cover.