INTRUSION SENSOR CANCEL SWITCH INSPECTION


  1. INSPECT INTRUSION SENSOR CANCEL SWITCH


    1. A003UAYE02
      *a

      Component without harness connected

      (Intrusion Sensor Cancel Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      A-1 - A-2 Intrusion sensor cancel switch pressed Below 1 Ω
      A-1 - A-2 Intrusion sensor cancel switch not pressed 10 kΩ or higher

      If the result is not as specified, replace the intrusion sensor cancel switch.