INTRUSION SENSOR CANCEL SWITCH INSTALLATION


  1. INSTALL THEFT WARNING SENSOR SWITCH ASSEMBLY


    1. Install the theft warning sensor switch assembly with the 2 screws.

    2. Connect the connector.

    3. Pull the theft warning sensor switch harness out of the roof console panel.

    4. Close the roof console case and install the 2 screws.

    5. Secure the theft warning sensor switch harness with the 3 seals.

      Tech Tips

      Reuse the removed seals.

  2. INSTALL MAP LIGHT ASSEMBLY


    1. A003SIV

      Connect the connector.

    2. Engage the 4 claws and 4 clips, and install the map light assembly.