INTRUSION SENSOR CANCEL SWITCH REMOVAL


  1. REMOVE MAP LIGHT ASSEMBLY


    1. A003UM4

      Using a moulding remover, disengage the 4 claws and 4 clips.

    2. Disconnect the connector and remove the map light assembly.

  2. REMOVE THEFT WARNING SENSOR SWITCH ASSEMBLY


    1. A003SFJ

      Remove the 3 seals.

      Tech Tips

      The removed seals will be reused.

    2. A003USS

      Remove the 2 screws and open the roof console case.

    3. A003TSD

      Remove the 2 screws.

    4. Disconnect the connector and remove the theft warning sensor switch assembly.