INTRUSION SENSOR REMOVAL


  1. REMOVE MAP LIGHT ASSEMBLY


    1. A003UM4

      Using a moulding remover, disengage the 4 claws and 4 clips.

    2. Disconnect the connector and remove the map light assembly.

  2. REMOVE THEFT WARNING RADAR SENSOR


    1. A003SFJE02
      Text in Illustration
      *1 Seal

      Remove the 3 seals.

      Tech Tips

      The removed seals will be reused.

    2. Disconnect the connector.

    3. A003USS

      Remove the 2 screws and open the roof console case.

    4. A003RLU

      Disconnect the connector.

    5. Remove the 3 screws and theft warning radar sensor.