INTRUSION SENSOR INSTALLATION


  1. INSTALL THEFT WARNING RADAR SENSOR


    1. Install the theft warning radar sensor with 3 screws.

      Connect the connector.

    2. Pull the theft warning radar sensor harness out of the roof console panel.

    3. Close the roof console case and install the 2 screws.

    4. Connect the connector.

    5. Secure the theft warning radar sensor harness with the 3 seals.

      Tech Tips

      Reuse the removed seals.

  2. INSTALL MAP LIGHT ASSEMBLY


    1. A003SIV

      Connect the connector.

    2. Engage the 4 claws and 4 clips, and install the map light assembly.