THEFT DETERRENT SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Data List.

    5. According to the display on the intelligent tester, read the Data List.

      Main Body (Main Body ECU (Multiplex Network Body ECU))
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      RR Door Courtesy SW Rear right door courtesy switch/ON or OFF

      ON: Rear right door RH open

      OFF: Rear right door RH closed

      		 -
      RL Door Courtesy SW Rear left door courtesy switch/ON or OFF

      ON: Rear left door LH open

      OFF: Rear left door LH closed

      		 -
      Back Door Courtesy SW Back door courtesy switch/ON or OFF

      ON: Back door open

      OFF: Back door closed

      		 -
      FR Door Lock Pos Front right door lock position switch/ON or OFF

      ON: Front right door unlocked

      OFF: Front right door locked

      		 -
      FR Door Courtesy Front right door courtesy switch/ON or OFF

      ON: Front right door open

      OFF: Front right door closed

      		 -
      FL Door Lock Pos Front left door lock position switch/ON or OFF

      ON: Front left door unlocked

      OFF: Front left door locked

      		 -
      FL Door Courtesy Front left door courtesy switch/ON or OFF

      ON: Front left door open

      OFF: Front left door closed

      		 -
      Hood Courtesy SW Engine hood courtesy signal/ON or OFF

      ON: Engine hood closed

      OFF: Engine hood open

      		 -
      RR-Door Lock Pos SW Rear door lock position switch/ON or OFF

      ON: Rear right or left door unlocked

      OFF: Rear right and left door locked

      		 -
      RL-Door Lock Pos SW Rear door lock position switch/ON or OFF

      ON: Rear left or right door unlocked

      OFF: Rear left and right door locked

      		 -
      Intrusion Sens OFF SW Intrusion sensor cancel switch/ON or OFF

      ON: Intrusion sensor cancel switch on

      OFF: Intrusion sensor cancel switch off

      		 -
      Intrusion Sensor Status of the intrusion sensor Detection/ON or OFF

      ON: Intrusion sensor detected

      OFF: Intrusion sensor not detected

      		 -
      Intrusion Sen Conn Intrusion sensor connecting/ON or OFF

      ON: Intrusion sensor connected

      OFF: Intrusion sensor not connected

      		 -
      Sealed Glas Brak Sen Glass breakage sensor connecting/With or Without

      With: Glass breakage sensor connected

      Without: Glass breakage sensor not connected

      		 -

  2. ACTIVE TEST

    Tech Tips

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Active Test.

    5. According to the display on the intelligent tester, perform the Active Test.

      Main Body (Main Body ECU (Multiplex Network Body ECU))
      Tester Display Test Part Control Range Diagnostic Note
      Hazard Hazard warning lights ON / OFF -
      Security Indicator Security indicator ON / OFF -
      Security Horn2 Theft warning siren ON / OFF -
      Vehicle Horn Vehicle horn ON / OFF -
      Power For Intrusion Sensor Intrusion sensor power supply ON / OFF -