LIGHTING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE LIGHTING SYSTEM (INT)

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting


    1. Customizing with the intelligent tester


      1. Connect the intelligent tester to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus: Body / Main Body / Utility / Customize / Illuminated Entry.

      5. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Lighting Time 15 s Changes the lighting time after closing all of the doors. (It will fade out immediately in case of turning the power switch from off to on (ACC or IG).) 7.5 s, 15 s or 30 s Main body ECU (Multiplex network body ECU)
        I/L when ACC OFF ON Lights up power switch illumination and No. 1 room light assembly when the power switch is turned from on (ACC or IG) to off. ON or OFF Main body ECU (Multiplex network body ECU)
        I/L ON W/Door Key Unlock ON Lights up power switch illumination and No. 1 room light assembly when doors are unlocked using a mechanical key or door control transmitter. ON or OFF Main body ECU (Multiplex network body ECU)
        Room Light when Aprchd ON Lights up the power switch illumination and No. 1 room light assembly when a key enters any actuation area around the doors. ON or OFF Main body ECU (Multiplex network body ECU)