DATA LIST
Tech Tips
Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Entry & Start or Main Body / Data List.
Read the Data List according to the display on the intelligent tester.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| D-Door Touch Sensor | Driver side door touch sensor / ON or OFF | ON: Sensor touched OFF: Sensor not touched |
- |
| P-Door Touch Sensor | Front passenger side door touch sensor / ON or OFF | ON: Sensor touched OFF: Sensor not touched |
- |
| D-Door Trigger Switch | Driver side door lock switch / ON or OFF | ON: Switch pressed OFF: Switch not pressed |
- |
| P-Door Trigger Switch | Front passenger side door lock switch / ON or OFF | ON: Switch pressed OFF: Switch not pressed |
- |
| Tr/B-Door Lock SW | Back door opener switch assembly (lock switch) / ON or OFF | ON: Back door opener switch assembly (lock switch) pushed OFF: Back door opener switch assembly (lock switch) not pushed |
- |
| Tr/B-Door Unlock SW | Back door opener switch assembly (opener switch) / ON or OFF | ON: Back door opener switch assembly (opener switch) pushed OFF: Back door opener switch assembly (opener switch) not pushed |
- |
| Ignition Switch | Power switch on (IG) / ON or OFF | ON: Power switch on (IG) or hybrid vehicle control system started OFF: Power switch off |
- |
| Unmatched Vehicle-ID | Communication condition between vehicle and key (vehicle-ID) / Yes or No | Yes: Key ID code not matched to vehicle No: Key ID code matched to vehicle |
- |
| No Response | Communication condition between vehicle and key (response) / Yes or No | Yes: Key ID code not matched to vehicle No: Key ID code matched to vehicle |
- |
| Unmatch Code or Form | Communication condition between vehicle and key (response code and format) / Yes or No | Yes: Key ID code not matched to vehicle No: Key ID code matched to vehicle |
- |
| Key Low Battery | Low key battery / Yes or No | Yes: Key battery voltage low No: Key battery voltage normal |
- |
| ID Code Difference(Resp) | Communication condition between vehicle and key (ID code) / Yes or No | Yes: Key ID code not matched to vehicle No: Key ID code matched to vehicle |
- |
| C Code Difference | Communication condition between vehicle and key (challenge code) / Yes or No | Yes: Key ID code not matched to vehicle No: Key ID code matched to vehicle |
- |
| Auto Entry Cancel SW | Entry function cancel / ON or OFF | Mode status displayed | - |
| Power Save Cnt 9 Day | Power save counter - 9 days / Min: 0; Max: 255 | Within range from 0 to 255 | - |
| Power Save Cnt 14 Day | Power save counter - 14 days / Min: 0; Max: 255 | Within range from 0 to 255 | - |
| Power Save Cnt 30 Day | Power save counter - 30 days / Min: 0; Max: 255 | Within range from 0 to 255 | - |
| Ignition Available Area | Ignition available area / Front or All | Customization status displayed | - |
| Parking Wait Time | Parking wait time / 0.5s, 1.5s, 2.5s or 5s | Customization status displayed | - |
| B-Dr Opening Operation | Back door opening operation / Long, Twice or OFF | Customization status displayed | - |
| Key Low Battery Warning | Low key battery warning / ON or OFF | Customization status displayed | - |
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| ACC SW | Power switch on (ACC) / ON or OFF | ON: Power switch on (ACC) OFF: Power switch off |
- |
| IG SW | Power switch on (IG) / ON or OFF | ON: Power switch on (IG) OFF: Power switch off |
- |
| RR Door Courtesy SW | Rear door courtesy light switch RH signal/ON or OFF | ON: Rear door RH open OFF: Rear door RH closed |
- |
| RL Door Courtesy SW | Rear door courtesy light switch LH signal/ON or OFF | ON: Rear door LH open OFF: Rear door LH closed |
- |
| Back Door Courtesy SW | Back door courtesy switch signal/ON or OFF | ON: Back door open OFF: Back door closed |
- |
| Back Door Open | Back door lock/Permit or Prohibit | Permit: Back door unlocked Prohibit: Back door locked |
- |
| Door Key SW-Lock | Driver door key-linked lock/unlock switch lock signal/ON or OFF | ON: Driver door key cylinder turned to lock position OFF: Driver door key cylinder not turned to lock position |
- |
| Door Key SW-Unlock | Driver door key-linked lock/unlock switch unlock signal/ON or OFF | ON: Driver door key cylinder turned to unlock position OFF: Driver door key cylinder not turned to unlock position |
- |
| FR Door Lock Pos | Front door lock position switch RH signal/LOCK or UNLOCK | LOCK: Front door RH locked UNLOCK: Front door RH unlocked |
- |
| FR Door Courtesy | Front door courtesy light switch RH signal/ON or OFF | ON: Front door RH open OFF: Front door RH closed |
- |
| FL Door Lock Pos | Front door lock position switch LH signal/LOCK or UNLOCK | LOCK: Front door LH locked UNLOCK: Front door LH unlocked |
- |
| FL Door Courtesy | Front door courtesy light switch LH signal/ON or OFF | ON: Front door LH open OFF: Front door LH closed |
- |
| RR-Door Lock Pos SW | Rear door lock position switch signal/LOCK or UNLOCK | LOCK: Rear door RH or LH locked UNLOCK: Rear door RH and LH unlocked |
- |
| RL-Door Lock Pos SW | Rear door lock position switch signal/LOCK or UNLOCK | LOCK: Rear door RH or LH locked UNLOCK: Rear door RH and LH unlocked |
- |
ACTIVE TEST
Tech Tips
Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Entry & Start or Main Body / Active Test.
Perform the Active Test according to the display on the intelligent tester.
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Inside Trunk/Backdoor Transmitter | Indoor electrical key oscillator (for rear floor) | ON/OFF | - |
| D-Seat Outside Transmitter | Door electrical key oscillator (for driver side) | ON/OFF | - |
| P-Seat Outside Transmitter | Door electrical key oscillator (for front passenger side) | ON/OFF | - |
| Fr-Seat Inside Transmitter | Indoor electrical key oscillator (for front floor) | ON/OFF | - |
| Rr-Seat Inside Transmitter | Indoor electrical key oscillator (for center floor) | ON/OFF | - |
| Outside Trunk/Backdoor Transmitter | Outside electrical key oscillator (for rear side) | ON/OFF | - |
| D-Seat Select | Driver side selection | ON/OFF | - |
| P-Seat Select | Front passenger side selection | ON/OFF | - |
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Trunk and Back-door Open | Back door lock motor | ON/OFF | - |