ENTRY AND START SYSTEM (for Entry Function) CUSTOMIZE PARAMETERS


  1. CUSTOMIZE ENTRY AND START SYSTEM (for Entry Function)

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the intelligent tester


      1. Connect the intelligent tester to the DLC3

      2. Turn the power switch on (IG).

      3. Turn the intelligent tester on

      4. Enter the following menus: Body / Entry&Start or Warning / Utility / Customize.

      5. Select the setting by referring to the table below.

        Entry & Start
        Display Default Content Setting Relevant ECU
        Park Wait Time 2.5 s Function that sets waiting time to permit opening door after door is locked with entry lock function 0.5 s, 1.5 s, 2.5 s or 5 s Certification ECU (Smart key ECU assembly)
        Ignition Available Area All Function that switches the entry hybrid vehicle control system start detection area Front or All Certification ECU (Smart key ECU assembly)
        B-Dr Opening Operation Long Function that opens the back door when the driver has the key and presses the back door opener switch assembly (opener switch) Long, Twice or OFF Certification ECU (Smart key ECU assembly)
        Warning
        Display Default Content Setting Relevant ECU
        Key Low Battery Warning ON Function that warns driver that the key battery is weak ON or OFF Certification ECU (Smart key ECU assembly)