WIRELESS DOOR LOCK CONTROL SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the intelligent tester


      1. Connect the intelligent tester to the DLC3

      2. Turn the power switch on (IG).

      3. Turn the intelligent tester on

      4. Enter the following menus: Body / Main Body / Utility / Customize / Wireless Door Lock or Illuminated Entry.

      5. Select the setting by referring to the table below.

        Wireless Door Lock
        Display Default Content Setting Relevant ECU
        Wireless Control ON Function that turns wireless door lock function on or off ON or OFF Main body ECU (Multiplex network body ECU)
        Hazard Answer Back ON

        When the doors are locked by wireless operation, the hazard warning lights flash once.

        When the doors are unlocked by wireless operation, the hazard warning lights flash twice.

        		 ON or OFF Main body ECU (Multiplex network body ECU)
        Open Door Warning ON The buzzer sounds when lock is pressed when any of the doors are ajar. ON or OFF Main body ECU (Multiplex network body ECU)
        Auto Lock Time 30 s Function that regulates the interval between unlocking and automatic relocking of doors 30 s, 60 s or 120 s Main body ECU (Multiplex network body ECU)
        Illuminated Entry
        Display Default Content Setting Relevant ECU
        Lighting Time 15 s Function that changes the lighting time after closing all doors. (It will quickly fade out in case of turning the power switch from off to on (ACC) or (IG).) 7.5 s, 15 s or 30 s Main body ECU (Multiplex network body ECU)