POWER DOOR LOCK CONTROL SYSTEM OPERATION CHECK

CHECK POWER DOOR LOCK OPERATION

1. Check basic functions.

   
   

   1. Check that all doors lock when the lock side of the door control switch (for manual operation) is pressed, and all doors unlock when the unlock side is pressed.

   2. Check that all doors lock when the driver door lock key cylinder is turned to lock using the key, and all doors unlock when the driver door key cylinder is turned to unlock.

2. Check the key lock-in prevention function.

   Note

   In order to prevent the key from being locked in, the following inspection should be performed with the driver door window open.

   
   

   1. Turn the power switch on (IG) or (ACC).

   2. With the driver door open, check that all doors unlock immediately after the door lock knob for the driver door is locked.

   3. With the driver door open, check that all doors unlock immediately after the lock side of the door control switch (for manual operation) is pressed.

   4. With the driver door open, lock the driver door lock knob and hold it for 2 seconds or more, then close the driver door and check that all doors unlock.

3. Check the security function of the door lock control system.

   
   

   1. Close all doors and leave the driver door window open so that the door control switch can be operated from outside the vehicle. (Step 1)

   2. Open the driver door and remove the key from the vehicle. With the door still open, lock the door using the lock knob. Hold the outside handle of the driver door open, and close the door while holding the handle open (confirm that the lock knob remains in the lock position). Then, check that the doors do not unlock when the unlock side of the door control switch (for manual operation) is pressed from outside the vehicle.

   3. Starting from Step 1, with the key outside the vehicle, close and lock the driver door using the mechanical key. Then, check that the doors do not unlock when the unlock side of the door control switch (for manual operation) is pressed from outside the vehicle.

   4. Starting from Step 1, with the key outside the vehicle, close and lock the driver door using wireless door lock or entry lock operation. Then, check that the doors do not unlock when the unlock side of the door control switch (for manual operation) is pressed from outside the vehicle.

      Tech Tips

      Check that the security function of the door lock control system is canceled under the following conditions:

      
      

      • The power switch is turned on (IG).

      • The driver door is unlocked using the key.

      • The unlock side of the door control switch (for manual operation) is pressed after the door lock knob is unlocked manually.

      • The doors are unlocked by wireless operation.

4. Check the illumination function.

   
   

   1. Set the map light switch to the door position.

   2. When the driver door is unlocked by the key linked or wireless operation with the power switch off and all doors closed and locked, check that the room light comes on.

   3. Check that the interior light turns off in approximately 15 seconds* if the doors have not been opened.

      Tech Tips

      *: This function can be customized Click here.

CHECK DOUBLE LOCK FUNCTION (w/ Double Locking System)

1. Check that the double locking function is set by using the wireless door lock operation.

   
   

   1. Open all windows.

   2. Turn the power switch off.

   3. Open and close the driver door, and make sure that all doors including the back door are closed securely.

   4. Press the transmitter lock switch twice within 5 seconds, and check that the hazard warning lights flash once as an answer back.

   5. Try to unlock all doors with the inside handle of the vehicle, and check that none of the doors unlock.

2. Check that the double locking function is set by using the entry lock operation.

   
   

   1. Open all windows.

   2. Turn the power switch off.

   3. Open and close the driver door, and make sure that all doors including the back door are closed securely.

   4. Push the lock switch on the outside door handle while holding the key within 5 seconds, and check that the hazard warning lights flash once as an answer back.

   5. Try to unlock all doors with the inside handle of the vehicle, and check that none of the doors unlock.

3. Check that the double locking function is canceled.

   
   

   1. Unlock the door by using the wireless unlock operation or entry unlock operation while the double locking function is set, and check that the hazard warning lights flash twice as an answer back.

   2. Check that the doors can be opened both by the inside of the handle and the outside of the handle.

      Tech Tips

      If the transmitter battery is depleted, only the driver door can be opened using the key. However, the theft deterrent system still remains on. The theft alarm will sound when the door is opened without using the transmitter.