CLEARANCE WARNING ECU REMOVAL


  1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)


    1. A003TTXE02
      Text in Illustration
      *1 Stopper
      *2 Glove Compartment Door Stopper

      Disengage the claw and release the glove compartment door stopper.

    2. Bend portions (A) and (B) in the direction indicated by the arrows in the illustration to release the 2 stoppers, and lower the glove compartment door assembly until the front of the door is level.

    3. A003TCOE03
      Text in Illustration
      *1 Hinge

      Pull the glove compartment door assembly horizontally toward the rear of the vehicle to release the 2 hinges, and remove the glove compartment door assembly.

      Note

      Pulling the glove compartment door assembly upward to remove it will cause the hinges to deform when reinstalling the door. Be sure to pull out the compartment door horizontally.

  2. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)


    1. A003SPSE03

      Disengage the 3 claws.

    2. Disengage the guide and remove the No. 2 instrument panel under cover sub-assembly.

  3. REMOVE FUSE BOX OPENING COVER (for RHD)


    1. A003UNG

      Disengage the 4 claws and 4 clips.

    2. Disconnect each connector and then remove the fuse box opening cover.

  4. REMOVE CLEARANCE WARNING ECU ASSEMBLY (for LHD)


    1. Disconnect the connector.

    2. A003SHJ

      Using a screwdriver, disengage the 2 claws and remove the clearance warning ECU assembly.

  5. REMOVE CLEARANCE WARNING ECU ASSEMBLY (for RHD)


    1. A003RHL

      Disconnect the connector.

    2. Remove the bolt and clearance warning ECU assembly.