REAR VIEW MONITOR SYSTEM (w/ Navigation System) SYSTEM DESCRIPTION


  1. GENERAL


    1. To assist the driver with parking the vehicle by displaying an image of the area behind the vehicle, this system has a rear television camera assembly mounted on the back door. The system displays the image on the navigation receiver assembly.

    2. This system consists of the following components:


      1. Navigation receiver assembly

      2. Rear television camera assembly

      3. No. 1 integration relay

      4. Power management control ECU

  2. FUNCTION OF COMPONENTS


    1. The navigation receiver assembly controls the system by using information from the following components:

      Item Function
      Rear Television Camera Assembly

      • Mounted on the back door to transmit an image of the area behind the vehicle to the navigation receiver assembly.

      • Has a color video camera that uses a Charge Coupled Device (CCD) and a wide-angle lens.
      Navigation Receiver Assembly

      • Receives visual signals, which contain images of the area behind the vehicle taken with the rear television camera assembly.

      • Performs control of the system by receiving the reverse signal from the power management control ECU.

      • Displays the rear view monitor image on the display panel.
      Power Management Control ECU Sends a signal to the navigation receiver assembly via the No. 1 integration relay to indicate that reverse (R) has been selected.
      No. 1 Integration Relay Receives the signal (reverse (R) has been selected) that the power management control ECU sent and sends it to the navigation receiver assembly.

  3. OPERATION EXPLANATION


    1. The navigation receiver assembly receives the reverse signal when the power switch is on (READY) and the shift lever is moved to R. After receiving the reverse signal, the navigation receiver assembly switches from the navigation system to the rear view monitor system.

  4. DIAGNOSTIC FUNCTION


    1. The navigation system has a diagnostic function that can be monitored using the navigation receiver assembly. Whether reverse (R) has been selected or not can be confirmed on the display Click here.