REAR VIEW MONITOR SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

VEHICLE BROUGHT TO WORKSHOP

NEXT

CUSTOMER PROBLEM ANALYSIS

NEXT

INSPECT AUXILIARY BATTERY VOLTAGE

1. Measure the auxiliary battery voltage with the power switch off.

   Standard Voltage
   11 to 14 V

   If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.

   
   

   NEXT

PROBLEM SYMPTOM CONFIRMATION

B

Go to step 6

A

SYMPTOM SIMULATION

NEXT

CHECK DTC FOR NAVIGATION SYSTEM

1. Check for audio and visual system DTCs Click here.

2. Check for navigation system DTCs Click here.

   Result
   Result Proceed to No DTCs are output. A DTCs are output (for audio and visual system). B DTCs are output (for navigation system). C

   
   

   B

   GO TO DIAGNOSTIC TROUBLE CODE CHART FOR AUDIO AND VISUAL SYSTEM Click here

   C

   GO TO DIAGNOSTIC TROUBLE CODE CHART FOR NAVIGATION SYSTEM Click here

   A

CHECK IF SAME SYMPTOM APPEARS IN AUDIO AND VISUAL SYSTEM

1. Refer to Audio and Visual System Click here.

2. Refer to Navigation System Click here.

   Result
   Result Proceed to Symptom does not appear A Symptom appears (follow the audio and visual system symptom chart to perform troubleshooting) B Symptom appears (follow the navigation system symptom chart to perform troubleshooting) C

   
   

   B

   GO TO AUDIO AND VISUAL SYSTEM (FOLLOW THE AUDIO AND VISUAL SYSTEM SYMPTOM CHART TO PERFORM TROUBLESHOOTING)

   C

   GO TO NAVIGATION SYSTEM (FOLLOW THE NAVIGATION SYSTEM SYMPTOM CHART TO PERFORM TROUBLESHOOTING)

   A

PROBLEM SYMPTOMS TABLE

1. Refer to Problem Symptoms Table Click here.

   Result
   Result Proceed to Fault is not listed in Problem Symptoms Table A Fault is listed in Problem Symptoms Table B

   
   

   B

   Go to step 10

   A

PERFORM TROUBLESHOOTING BASED ON MALFUNCTION SYMPTOM

1. Refer to Terminals of ECU Click here.

   
   

   NEXT

ADJUST, REPAIR OR REPLACE

NEXT

CONFIRMATION TEST

NEXT