NAVIGATION SYSTEM RDS-TMC does not Function

INSPECTION PROCEDURE

Tech Tips


  • RDS-TMC function settings can be changed by the user.

  • Before troubleshooting, check the settings on the menu screen of the navigation system, and confirm that the relevant item settings are correct.

  • The RDS-TMC function of the navigation system operates in the same way as the radio, according to the signals received by the navigation receiver assembly. It is therefore necessary to also check that the RDS-TMC function of the navigation receiver assembly is normal.

  • A short period of time may be required to update RDS-TMC signals depending on the signal reception conditions.

PROCEDURE


  1. CHECK NAVIGATION SETTING


    1. Turn the audio system off and move the vehicle to a location where signal reception is possible.

    2. Display the "RDS-TMC" screen.

    3. A003RITE01
      Text in Illustration
      *a Example

      Check if an RDS-TMC station is selected.

      OK
      An RDS-TMC station is selected.

    NG

    CHECK NAVIGATION SETTING Click here

    OK

    REPLACE NAVIGATION RECEIVER ASSEMBLY Click here

  2. CHECK NAVIGATION SETTING


    1. A003SG8E01
      Text in Illustration
      *a Example

      Select a station using "Aut.".

    2. Check if an RDS-TMC station is automatically selected.

      Tech Tips


      • The RDS-TMC system automatically selects an RDS-TMC station.

      • A short period of time may be required before an RDS-TMC station is selected.

      OK
      The strongest RDS-TMC station is selected.

    NG

    CHECK NAVIGATION RECEIVER ASSEMBLY Click here

    OK

    END

  3. CHECK NAVIGATION RECEIVER ASSEMBLY


    1. Check if the RDS-TMC function of the navigation receiver assembly operates normally.

      OK
      The RDS-TMC function operates normally.

    NG

    REPLACE NAVIGATION RECEIVER ASSEMBLY Click here

    OK

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here