NAVIGATION ECU INSTALLATION


  1. INSTALL EXTENSION MODULE


    1. Connect the connector to install the extension module.

    2. Connect the each connector to install the navigation wire and radio cable.

  2. INSTALL NO. 1 RADIO BRACKET


    1. w/o Navigation System


      1. Install the No. 1 radio bracket with the 3 screws.

    2. w/ Navigation System


      1. Install the No. 1 radio bracket with the 5 screws.

  3. INSTALL NO. 2 RADIO BRACKET


    1. w/o Navigation System


      1. Install the No. 2 radio bracket with the 3 screws.

    2. w/ Navigation System


      1. Install the No. 2 radio bracket with the 5 screws.

  4. INSTALL RADIO AND DISPLAY RECEIVER WITH BRACKET


    1. Connect each connector.

    2. Install the radio and display receiver with bracket with the 4 bolts.

  5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. Engage the 4 clips and install the center instrument cluster finish panel sub-assembly.

  6. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    1. Connect the connector.

    2. A003U5ME03

      Engage the 3 guides, 5 claws and 2 clips, and install the center instrument panel register assembly.

  7. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. A003SDS

      Engage the 4 clips and install the instrument panel finish panel end LH.

  8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH


    1. A003ROO

      Engage the 4 clips and install the instrument panel finish panel end RH.