FRONT BUMPER REASSEMBLY


  1. INSTALL FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY LH


    1. A01JBY3

      Engage the guide and install the front side member bracket sub-assembly LH.

    2. Install the 4 bolts.

      Torque:
      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

  2. INSTALL FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  3. INSTALL FRONT BUMPER SIDE SUPPORT LH


    1. A01JBWOE01
      Text in Illustration
      *1 Bolt
      *2 Screw

      Engage the 2 claws and install the front bumper side support LH.

    2. Install the bolt and screw.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  4. INSTALL FRONT BUMPER SIDE SUPPORT RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  5. INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY


    1. A01JCO2

      Install the front bumper reinforcement sub-assembly with the 6 bolts.

      Torque:
      34 N*m  { 347 kgf*cm, 25 ft.*lbf }

    2. Engage the 5 clamps.

  6. INSTALL FRONT BUMPER ENERGY ABSORBER


    1. A01J9PD

      Engage the 4 guides to install the front bumper energy absorber.

  7. INSTALL FRONT BUMPER SEAL


    1. Clean the vehicle front bumper reinforcement sub-assembly surface.


      1. Remove the double-sided tape from the vehicle front bumper reinforcement sub-assembly.

      2. Wipe off any tape adhesive residue with cleaner.

    2. Remove the release paper from the front bumper seal.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. A01J9YVE01
      Text in Illustration
      *1 Double-sided Tape

      Install a new front bumper seal.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  8. INSTALL NO. 1 LOWER RADIATOR GRILLE


    1. A01J9KW

      Engage the 16 claws to install the No. 1 lower radiator grille.

  9. INSTALL FRONT BUMPER HOLE COVER LH


    1. A01J8L9E01
      Text in Illustration
      *1 Hook

      Engage the hook.

    2. Engage the 2 claws and install the front bumper hole cover LH.

  10. INSTALL FRONT BUMPER HOLE COVER RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  11. INSTALL FRONT TURN SIGNAL LIGHT ASSEMBLY LH


    1. A01J9T0E01

      Engage the 3 claws.

    2. for Nut Type:


      1. Install the front turn signal light assembly with the nut.

        Torque:
        5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

        Tech Tips

        Screw type front turn signal light assemblies are provided as replacement parts. When replacing the front turn signal light assembly with a new one, install it with the screw provided.

    3. for Screw Type:


      1. Install the front turn signal light assembly with the screw.

        Torque:
        1.7 N*m  { 17 kgf*cm, 15 in.*lbf }

    4. Connect the connector.

  12. INSTALL FRONT TURN SIGNAL LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  13. INSTALL FOG LIGHT COVER LH


    1. A01J9GL

      Engage the 4 claws and install the fog light cover LH.

  14. INSTALL FOG LIGHT COVER RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  15. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)


    1. A01JCKJ

      Engage the 2 guides.

    2. Install the fog light assembly with the screw.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

    3. Connect the connector.

  16. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)

    Tech Tips

    Use the same procedure for the RH side and LH side.

  17. INSTALL FRONT FENDER LINER RETAINER


    1. A01JA46

      Engage the claw and install the front fender liner retainer.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  18. INSTALL RADIATOR GRILLE EMBLEM ASSEMBLY


    1. A01JCYV

      Engage the 2 pins and 4 claws, and install the radiator grille emblem assembly.

    2. Install the 2 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  19. INSTALL RADIATOR GRILLE


    1. A01JD6H

      Engage the 12 claws and install the radiator grille.

    2. A01JA6K

      Install the 4 clips.

  20. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intelligent Parking Assist System)


    1. A01JCBTE01
      Text in Illustration
      *1 Protrusion
      *2 Keyhole

      Temporarily install the No. 1 ultrasonic sensor retainer to the front bumper.

      Note


      • Do not damage the front bumper with the protrusion when installing the retainer.

      • Securely install the No. 1 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the front bumper.

      Tech Tips

      When installing the retainer, align the keyhole and protrusion as shown in the illustration.

    2. A01JB71

      Engage the 2 claws to install the No. 1 ultra sonic sensor retainer to the front bumper.

      Tech Tips

      Use the same procedure for the RH side and the LH side.

  21. INSTALL NO. 1 ULTRASONIC SENSOR (w/ Intelligent Parking Assist System)


    1. A01JCRH

      Engage the 2 claws to install the No. 1 ultrasonic sensor as shown in the illustration.

      Note

      Push the No. 1 ultrasonic sensor retainer from the outside of the bumper when there is a gap between the retainer and the bumper surface. In this case, do not push on the ultrasonic sensor.

    2. A01JCN2

      Engage the 4 claws to connect the wire harness with bracket.

    3. Connect the connector.

      Tech Tips

      Use the same procedure for the RH side and the LH side.

  22. INSTALL ENGINE ROOM NO. 3 WIRE


    1. A01J9DA

      Engage the 7 clamps.

    2. A01JCHC

      Engage the 3 clamps.

    3. A01J8ON

      Engage the 2 clamps and install the engine room No. 3 wire.

  23. INSTALL HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)


    1. A01J8DS

      Engage the 5 clamps and install the headlight cleaner hose.

  24. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)


    1. A01J8G7

      Engage the 2 claws to install the headlight washer actuator sub-assembly.

    2. Install the bolt.

      Torque:
      1.1 N*m  { 11 kgf*cm, 10 in.*lbf }

    3. Connect the headlight washer hose.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  25. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure for the RH side and LH side.

  26. INSTALL HEADLIGHT CLEANER WASHER NOZZLE LH (w/ Headlight Cleaner System)


    1. A01J9UK

      Engage the 2 claws to install the headlight cleaner washer nozzle.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  27. INSTALL HEADLIGHT CLEANER WASHER NOZZLE RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure for the RH side and LH side.

  28. INSTALL HOOD TO FRONT END PANEL SEAL


    1. A01JCZNE01
      Text in Illustration
      *1 Double-sided Tape

      Engage the 2 clips and install the new hood to front end panel seal.

    2. Install the 7 clips.

  29. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET


    1. A01J8OT

      Install the front bumper extension mounting bracket with the 2 screws.