FRONT BUMPER DISASSEMBLY


  1. REMOVE HEADLIGHT CLEANER WASHER NOZZLE LH (w/ Headlight Cleaner System)


    1. A01JA9DE01
      Text in Illustration
      *1 Protective Tape

      Extend the headlight cleaner washer nozzle.

    2. Using a screwdriver, disengage the 2 claws and remove the headlight cleaner washer nozzle.

      Tech Tips


      • Tape the screwdriver tip before use.

      • Use the same procedure for the RH side and LH side.

  2. REMOVE HEADLIGHT CLEANER WASHER NOZZLE RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure for the RH side and LH side.

  3. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)


    1. A01JBPDE02

      Disconnect the headlight washer hose.

    2. Remove the bolt.

    3. Disengage the 2 claws and remove the headlight washer actuator sub-assembly as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  4. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure for the RH side and LH side.

  5. REMOVE NO. 1 ULTRASONIC SENSOR (w/ Intelligent Parking Assist System)


    1. A01JCN2

      Disconnect the connector.

    2. Disengage the 4 claws and disconnect the wire harness with bracket.

    3. A01JCXS

      Disengage the 2 claws and remove the No. 1 ultrasonic sensor.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  6. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intelligent Parking Assist System)


    1. A01JB71

      Disengage the 2 claws and remove the No. 1 ultrasonic sensor retainer.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  7. REMOVE FRONT TURN SIGNAL LIGHT ASSEMBLY LH


    1. A01J9T0E01

      Disconnect the connector.

    2. for Nut Type:


      1. Remove the nut.

        Tech Tips

        Screw type front turn signal light assemblies are provided as replacement parts. When replacing the front turn signal light assembly with a new one, install it with the screw provided.

    3. for Screw Type:


      1. Remove the screw.

    4. Disengage the 3 claws and remove the front turn signal light assembly.

  8. REMOVE FRONT TURN SIGNAL LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  9. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)


    1. A01JCKJ

      Disconnect the connector.

    2. Remove the screw.

    3. Disengage the 2 guides and remove the fog light assembly.

  10. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)

    Tech Tips

    Use the same procedure for the RH side and LH side.

  11. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET


    1. A01JBNA

      Remove the 2 screws.

    2. Disengage the 2 claws and remove the front bumper extension mounting bracket.

  12. REMOVE HOOD TO FRONT END PANEL SEAL


    1. A01JCZNE01
      Text in Illustration
      *1 Double-sided Tape

      Remove the 7 clips.

    2. Disengage the 2 clips and remove the hood to front end panel seal.

  13. REMOVE HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)


    1. A01J8DS

      Disengage the 5 clamps and remove the headlight cleaner hose.

  14. REMOVE ENGINE ROOM NO. 3 WIRE


    1. A01JCHC

      Disengage the 3 clamps.

    2. A01J8ON

      Disengage the 2 clamps.

    3. A01J9DA

      Disengage the 7 clamps and remove the engine room No. 3 wire.

  15. REMOVE RADIATOR GRILLE


    1. A01JA6K

      Remove the 4 clips.

    2. A01JD6H

      Disengage the 12 claws and remove the radiator grille.

  16. REMOVE RADIATOR GRILLE EMBLEM ASSEMBLY


    1. A01JCYV

      Remove the 2 screws.

    2. Disengage the 4 claws and 2 pins, and remove the radiator grille emblem assembly.

  17. REMOVE FRONT FENDER LINER RETAINER


    1. A01JA46

      Disengage the claw and remove the front fender liner retainer.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  18. REMOVE FOG LIGHT COVER LH


    1. A01J9GL

      Disengage the 4 claws and remove the fog light cover LH.

  19. REMOVE FOG LIGHT COVER RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  20. REMOVE FRONT BUMPER HOLE COVER LH


    1. A01J8L9E01
      Text in Illustration
      *1 Hook

      Disengage the 2 claws.

    2. Disengage the hook and remove the front bumper hole cover LH.

  21. REMOVE FRONT BUMPER HOLE COVER RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  22. REMOVE NO. 1 LOWER RADIATOR GRILLE


    1. A01J9KW

      Disengage the 16 claws and remove the No. 1 lower radiator grille.

  23. REMOVE FRONT BUMPER SEAL


    1. A01J9YVE01
      Text in Illustration
      *1 Double-sided Tape

      Remove the front bumper seal.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  24. REMOVE FRONT BUMPER ENERGY ABSORBER


    1. A01J9PD

      Disengage the 4 guides and remove the front bumper energy absorber.

  25. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY


    1. A01JCO2

      Disengage the 5 clamps.

    2. Remove the 6 bolts and front bumper reinforcement sub-assembly.

  26. REMOVE FRONT BUMPER SIDE SUPPORT LH


    1. A01JBWOE01
      Text in Illustration
      *1 Bolt
      *2 Screw

      Remove the bolt and screw.

    2. Disengage the 2 claws and remove the front bumper side support LH.

  27. REMOVE FRONT BUMPER SIDE SUPPORT RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  28. REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY LH


    1. A01JBY3

      Remove the 4 bolts.

    2. Disengage the guide and remove the front side member bracket sub-assembly LH.

  29. REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and LH side.