LOW PITCHED HORN INSTALLATION


  1. INSTALL LOW PITCHED HORN ASSEMBLY


    1. A01J90N

      Install the low pitched horn assembly with the bolt.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

    2. Connect the connector.

  2. INSTALL FRONT BUMPER ASSEMBLY


    1. Connect the headlight cleaner hose. (w/ Headlight Cleaner System)

    2. Connect each connector.

    3. A01JAP9

      Install the front bumper assembly as shown in the illustration.

    4. A01J9KS

      Engage the 3 claws to install the front bumper assembly.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    5. A01JCXU

      Engage the 2 guides and install the front spoiler cover. (w/ Front Spoiler)

    6. Install the 2 clips and 2 screws. (w/ Front Spoiler)

    7. A01JC94

      Install the 7 clips.

    8. Install the 2 bolts and 4 screws.

    9. A01JA6C

      Install the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    10. A01J9M2E01

      Install the pin hold clip.

      Note

      Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  3. INSTALL RADIATOR SUPPORT OPENING COVER


    1. A01JAHH

      Engage the 2 claws and install the radiator support opening cover.

    2. Install the 3 clips.

  4. ADD WASHER FLUID (w/ Headlight Cleaner System)


    1. Add washer fluid to the washer jar.

  5. ADJUST FOG LIGHT AIMING

    Click here