STOP LIGHT CONTROL RELAY REMOVAL


  1. REMOVE FRONT DOOR SCUFF PLATE


    1. A01JB0N

      Disengage the 10 claws and remove the front door scuff plate LH.

  2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY


    1. A01J99M

      Remove the clip.

    2. Disengage the 2 clips and remove the cowl side trim sub-assembly LH.

  3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY


    1. A01JA5Y

      Remove the screw <C>.

    2. A01JCRX

      Disengage the 6 claws and clip as shown in the illustration.

    3. A01J9TK

      Disengage the claw and 2 guides and disconnect the hood lock control cable.

    4. Disconnect each connector and clamp, and remove the lower instrument panel finish panel assembly.

  4. REMOVE STOP LIGHT CONTROL ECU ASSEMBLY (for LHD)


    1. A01J9HX

      Using a clip remover, disengage the clamp.

    2. Disconnect the connector and remove the stop light control ECU assembly.

  5. REMOVE STOP LIGHT CONTROL ECU ASSEMBLY (for RHD)


    1. A01J8I8

      Using a clip remover, disengage the clamp.

    2. Disconnect the connector and remove the stop light control ECU assembly.