HEADLIGHT LEVELING ECU REMOVAL


  1. REMOVE UPPER INSTRUMENT PANEL ASSEMBLY

    Tech Tips

    Refer to the procedure up to Remove Upper Instrument Panel Assembly Click here.

  2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)


    1. A01JCZAE01
      Text in Illustration
      *1 Glove Compartment Door Stopper Sub-assembly
      *2 Stopper

      Disengage the claw and release the glove compartment door stopper.

    2. Slightly bend stoppers (A) and (B) in the directions indicated by the arrows in the illustration and pull the glove compartment door assembly until the stoppers are released.

    3. A01JBKLE01
      Text in Illustration
      *a Close
      *b Open Approximately

      Open the glove compartment door assembly to approximately 55° from its closed position. Pull it horizontally in the direction indicated by the arrow to disengage the 2 hinges and remove the glove compartment door assembly.

      Note

      Pulling the glove compartment door assembly upward to remove it causes the hinges to deform. Be sure to pull out the glove compartment door assembly horizontally.

  3. REMOVE HEADLIGHT LEVELING ECU ASSEMBLY (for LHD)


    1. A01JD2Z

      Disconnect the connector.

    2. Remove the bolt.

    3. Disengage the guide and remove the headlight leveling ECU assembly.

  4. REMOVE HEADLIGHT LEVELING ECU ASSEMBLY (for RHD)


    1. A01JCVN

      Disconnect the connector.

    2. Remove the bolt.

    3. Disengage the guide and remove the headlight leveling ECU assembly.