HAZARD WARNING SWITCH REMOVAL


  1. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. A01J9ZGE01
      Text in Illustration
      *a Lift slightly

      Using a moulding remover, slightly lift the panel at the position shown in the illustration.

    2. Pull the integration control and panel assembly in the direction indicated by the arrow to disengage the 6 claws.

    3. Disconnect each connector and remove the integration control and panel assembly.

  2. REMOVE INTEGRATION CONTROL AND PANEL SUB-ASSEMBLY


    1. A01JBTH

      Using a screwdriver, disengage the 6 claws and remove the integration control and panel sub-assembly.