LICENSE PLATE LIGHT ASSEMBLY REMOVAL


  1. REMOVE BACK DOOR TRIM BOARD ASSEMBLY


    1. A01JC1S

      Using a moulding remover, disengage the clip and claw.

    2. A01JD3V

      Using a moulding remover, disengage the clip and claw.

    3. A01JA9PE01

      Disengage the 3 clips in the order shown in the illustration.

    4. A01J91Z

      Disengage the 2 clips by pulling the back door trim board assembly in the direction indicated by the arrows in the illustration.

    5. A01JC5YE01
      Text in Illustration
      *1 Back Door Trim Board Assembly
      *2 Back Door Panel
      *a The portion that may be damaged due to interference

      Remove the back door trim board assembly by pulling it in the direction indicated by the arrow in the illustration to disengage the 4 clips.

      Note

      Make sure to pull the back door trim board assembly in the direction indicated by the arrow in the illustration. If the back door trim board assembly is removed from the lower part, the door pull handle mounting area may interfere with the back door panel, resulting in damage to the back door trim board assembly.

  2. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY


    1. A01J8PBE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the back door outside garnish sub-assembly.

    2. A01JBLE

      Remove the 4 nuts.

    3. A01JAGV

      Disengage the 11 clips and remove the back door outside garnish sub-assembly.

    4. Remove the 11 clips (back door outside garnish clip) from the back door outside garnish sub-assembly.

    5. Remove the 4 gaskets from the back door outside garnish sub-assembly.

  3. REMOVE LICENSE PLATE LIGHT ASSEMBLY


    1. A01JCZR

      Disconnect the connector.

    2. Disengage the 2 claws and remove the license plate light assembly.

  4. REMOVE LICENSE PLATE LIGHT BULB


    1. A01JBNH

      Turn the license plate light bulb and license plate light socket and wire in the direction indicated by the arrow shown in the illustration, and remove them as a unit.

    2. Remove the license plate light bulb from the license plate light socket and wire.