REAR COMBINATION LIGHT ASSEMBLY REASSEMBLY
-
INSTALL REAR COMBINATION LIGHT CLIP
-
Install 2 new rear combination light clips.
-
-
INSTALL REAR COMBINATION LIGHT GASKET
-
Install a new rear combination light gasket.
-
-
INSTALL REAR BUMPER UPPER RETAINER
-
Engage the claw and install the rear bumper upper retainer.
-
-
INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY
-
Connect the connector.
-
Engage the 2 clamps to install the rear combination light socket and wire sub-assembly.
-
-
INSTALL BACK-UP LIGHT BULB
-
Install the back-up light bulb to the rear combination light socket and wire sub-assembly.
-
Turn the rear combination light socket and wire sub-assembly with the back-up light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.
-
-
INSTALL NO. 1 REAR FOG LIGHT BULB (w/ Rear Fog Light)
-
Install the No. 1 rear fog light bulb to the rear combination light socket and wire sub-assembly.
-
for LHD:
-
Turn the rear combination light socket and wire sub-assembly with the No. 1 rear fog light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.
-
-
for RHD:
-
Turn the rear combination light socket and wire sub-assembly with the No. 1 rear fog light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.
-
-
-
INSTALL REAR TURN SIGNAL LIGHT BULB
-
Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly.
-
Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.
-
-
INSTALL REAR COMBINATION LIGHT BODY GASKET
-
Install a new rear combination light body gasket.
-