REAR COMBINATION LIGHT ASSEMBLY REASSEMBLY


  1. INSTALL REAR LIGHT GUIDE


    1. A01J9GZ

      Install 2 new rear light guides.

  2. INSTALL REAR COMBINATION LIGHT GASKET


    1. A01J8P2

      Install a new rear combination light gasket.

  3. INSTALL REAR BUMPER UPPER RETAINER


    1. A01JC9G

      Engage the claw and install the rear bumper upper retainer.

  4. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    1. A01J919

      Engage the clamp.

    2. Connect the connector.

    3. A01J9TJ

      Turn the cap in the direction indicated by the arrow shown in the illustration to install the cap of the rear combination light socket and wire sub-assembly.

  5. INSTALL BACK-UP LIGHT BULB


    1. Install the back-up light bulb to the rear combination light socket and wire sub-assembly.

    2. A01J9HV

      Turn the back-up light bulb and rear combination light socket and wire sub-assembly in the direction indicated by the arrow shown in the illustration to install them as a unit.

  6. INSTALL NO. 1 REAR FOG LIGHT BULB (w/ Rear Fog Light)


    1. Install the No. 1 rear fog light bulb to the rear combination light socket and wire sub-assembly.

    2. A01JBZO

      Turn the No. 1 rear fog light bulb and rear combination light socket and wire sub-assembly in the direction indicated by the arrow shown in the illustration to install them as a unit.

  7. INSTALL REAR TURN SIGNAL LIGHT BULB


    1. Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly.

    2. A01J95N

      Turn the rear turn signal light bulb and rear combination light socket and wire sub-assembly in the direction indicated by the arrow shown in the illustration to install them as a unit.

  8. INSTALL REAR COMBINATION LIGHT BODY GASKET


    1. A01JD9J

      Install a new rear combination light body gasket.