SIDE TURN SIGNAL LIGHT ASSEMBLY REMOVAL


  1. REMOVE OUTER MIRROR


    1. A01JD6Q

      Push the outside part of the outer mirror assembly and tilt it as show in the illustration.

    2. A01JAFNE01
      Text in Illustration
      *1 Protruding Part

      Push the upper part of the mirror surface and tilt it.

    3. Apply protective tape as shown in the illustration.

    4. A01JC63

      Using a moulding remover, disengage the 2 claws at the lower part of the outer rear view mirror, and separate the outer rear view mirror glass.

    5. A01JCOJ

      w/o Mirror Heater:


      1. Disengage the 2 guides at the upper part of the outer mirror

      2. Remove the outer mirror.

    6. A01JA7Q

      w/ Mirror Heater:


      1. Disengage the 2 guides at the upper part of the outer mirror.

      2. Disconnect the 2 connectors and remove the outer mirror.

  2. REMOVE OUTER MIRROR COVER


    1. A01JAW0

      Disengage the 4 claws.

    2. A01J8NX

      Disengage the 3 claws and remove the outer mirror cover as shown in the illustration.

  3. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY


    1. A01JCF6

      Disconnect the connector.

    2. Remove the 3 screws and side turn signal light assembly.