FRONT TURN SIGNAL LIGHT ASSEMBLY REMOVAL


  1. REMOVE RADIATOR SUPPORT OPENING COVER


    1. A01JAHH

      Remove the 3 clips.

    2. Disengage the 2 claws and remove the radiator support opening cover.

  2. REMOVE FRONT BUMPER ASSEMBLY


    1. A01JD5JE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the front bumper assembly.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    2. A01JAG6

      Using a screwdriver, turn the pins 90 degrees and remove the pin hold clip.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    3. A01JA6C

      Remove the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    4. A01JC94

      Remove the 2 bolts and 4 screws.

    5. Using a clip remover, remove the 7 clips.

    6. A01JCXU

      Using a clip remover, remove the 2 clips. (w/ Front Spoiler)

    7. Remove the 2 screws. (w/ Front Spoiler)

    8. Disengage the 2 guides and remove the front spoiler cover. (w/ Front Spoiler)

    9. A01JC21

      Disengage the 3 claws and remove the front bumper assembly.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    10. Disconnect each connector.

    11. Disconnect the headlight cleaner hose and drain the washer fluid. (w/ Headlight Cleaner System)

      Tech Tips

      Use a container to collect the washer fluid.

    12. A01J8EC

      Remove the front bumper assembly as shown in the illustration.

  3. REMOVE FRONT TURN SIGNAL LIGHT ASSEMBLY


    1. A01J9T0E01

      Disconnect the connector.

    2. for Nut Type:


      1. Remove the nut.

        Tech Tips

        Screw type front turn signal light assemblies are provided as replacement parts. When replacing the front turn signal light assembly with a new one, install it with the screw provided.

    3. for Screw Type:


      1. Remove the screw.

    4. Disengage the 3 claws and remove the front turn signal light assembly.

  4. REMOVE FRONT TURN SIGNAL LIGHT BULB


    1. A01JANR

      Turn the front turn signal light bulb and front turn signal light plug assembly in the direction indicated by the arrow shown in the illustration, and remove them as a unit.

    2. Remove the front turn signal light bulb from the front turn signal light plug assembly.