HEADLIGHT ASSEMBLY DISASSEMBLY


  1. REMOVE NO. 1 HEADLIGHT BULB


    1. A01J9YS

      Turn the No. 1 headlight bulb in the direction indicated by the arrow shown in the illustration, and remove it.

      Note

      Do not touch the bulb glass.

  2. REMOVE NO. 2 HEADLIGHT BULB (for Halogen Headlight)


    1. A01JB3S

      Turn the No. 2 headlight bulb in the direction indicated by the arrow shown in the illustration, and remove it.

      Note

      Do not touch the bulb glass.

  3. REMOVE CLEARANCE LIGHT BULB


    1. A01JBTD

      Turn the clearance light bulb and headlight cord in the direction indicated by the arrow shown in the illustration, and disconnect them as a unit.

    2. Remove the clearance light bulb from the clearance light socket.

  4. REMOVE HEADLIGHT CORD (for Halogen Headlight)


    1. A01J8D2

      Disengage the 2 clamps and remove the headlight cord.

  5. REMOVE HEADLIGHT LEVELING MOTOR


    1. A01JAK3E01

      Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (1) shown in the illustration.

    2. Turn the headlight leveling motor in the direction indicated by the arrow (2) shown in the illustration to release it.

      Tech Tips

      When removing the headlight leveling motor of the headlight assembly RH, turn the headlight leveling motor in the opposite direction indicated by the arrow (2) shown in the illustration.

    3. A01J9AUE01

      Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (3) shown in the illustration to disengage the shaft.

    4. Pull out the headlight leveling motor in the direction indicated by the arrow (4) shown in the illustration to remove it.

  6. REMOVE HEADLIGHT LEVELING MOTOR BASE PACKING


    1. Remove the headlight leveling motor base packing.

      Note

      After the headlight leveling motor base packing is removed, be sure to replace it with a new one. Failure to do this may cause water ingress.

  7. REMOVE HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY (for LED Headlight)


    1. A01JD8B

      Remove the 4 screws and disconnect the headlight light control ECU sub-assembly.

    2. A01JBXA

      Disconnect the 2 connectors and remove the headlight light control ECU sub-assembly.

  8. REMOVE HEADLIGHT GASKET (for LED Headlight)


    1. Remove the headlight gasket.

      Note

      After the headlight gasket is removed, be sure to replace it with a new one. Failure to do this may cause water ingress.