HEADLIGHT ASSEMBLY REPAIR

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

  • If the installation area of the headlight assembly is damaged, use the supply retainer for low-cost repair.

  • Ensure that the headlight assembly is not damaged.


  1. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER (for Halogen Headlight)


    1. A01J9GO

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the upper headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A01JCPF

      Install the upper headlight protector retainer with the 2 screws.

  2. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER (for LED Headlight)


    1. A01J93G

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the upper headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A01JBO4

      Install the upper headlight protector retainer with the 2 screws.

  3. INSTALL UPPER NO. 2 HEADLIGHT PROTECTOR RETAINER (for Halogen Headlight)


    1. A01JDAB

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the upper No. 2 headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A01JAMZ

      Install the upper No. 2 headlight protector retainer with the 2 screws.

  4. INSTALL UPPER NO. 2 HEADLIGHT PROTECTOR RETAINER (for LED Headlight)


    1. A01JB91

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the upper No. 2 headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A01JCE8

      Install the upper No. 2 headlight protector retainer with the 2 screws.

  5. INSTALL LOWER HEADLIGHT PROTECTOR RETAINER (for Halogen Headlight)


    1. A01J8ER

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the lower headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A01J9EP

      Install the lower headlight protector retainer with the 2 screws.

  6. INSTALL LOWER HEADLIGHT PROTECTOR RETAINER (for LED Headlight)


    1. A01J8DN

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the lower headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A01JA8P

      Install the lower headlight protector retainer with the 2 screws.

  7. INSTALL LOWER NO. 2 HEADLIGHT PROTECTOR RETAINER


    1. A01JCU9

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the lower No. 2 headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A01JC88

      Install the lower No. 2 headlight protector retainer with the 2 screws.