HEADLIGHT ASSEMBLY INSTALLATION


  1. INSTALL HEADLIGHT ASSEMBLY


    1. Connect each connector.

    2. Engage the clamp.

    3. A01JAUG

      Engage the claw.

    4. Install the headlight assembly with the bolt and 2 screws.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  2. INSTALL FRONT BUMPER ASSEMBLY

    Click here

  3. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSTALL REAR NO. 3 FLOOR BOARD


    1. A01JC33

      Engage the 2 guides to install the rear No. 3 floor board.

  5. INSTALL REAR DECK FLOOR BOX


    1. Install the rear deck floor box.

  6. INSTALL REAR NO. 2 FLOOR BOARD


    1. A01JCWRE01

      Engage the 3 guides <A>.

    2. Engage the 2 guides <B> and install the rear No. 2 floor board as shown in the illustration.

  7. ADJUST HEADLIGHT AIMING

    Click here

  8. ADJUST FOG LIGHT AIMING

    Click here