HEADLIGHT CLEANER SWITCH INSTALLATION


  1. INSTALL HEADLIGHT CLEANER SWITCH ASSEMBLY


    1. A01JD0W

      Engage the 2 claws to install the headlight cleaner switch assembly as shown in the illustration.

  2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY


    1. Connect each connector.

    2. Engage the clamp.

    3. Engage the 2 guides and claw to connect the hood lock control cable.

    4. A01J96A

      Engage the 6 claws and clip.

    5. Install the lower instrument panel finish panel assembly with the screw <C>.

  3. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH


    1. A01J99M

      Engage the 2 clips.

    2. Install the cowl side trim board LH with the clip.

  4. INSTALL FRONT DOOR SCUFF PLATE LH


    1. A01JB0N

      Engage the 10 claws to install the front door scuff plate LH.