WASHER NOZZLE (for Rear Side) ON-VEHICLE INSPECTION


  1. INSPECT REAR WASHER NOZZLE


    1. With the engine running, check that the center stream of washer fluid sprays on the windshield within the hatched area shown in the illustration.

      Standard
      Washer fluid hits the windshield in the area shown in the illustration.
      A01JAFUE01
      Standard Clearance
      Area Measurement
      A 48.7 mm (1.92 in.)

      Tech Tips

      If the result is not as specified, replace the malfunctioning rear washer nozzle.