WASHER NOZZLE (for Front Side) INSTALLATION


  1. INSTALL WASHER NOZZLE SUB-ASSEMBLY


    1. A01JAP3

      Connect a new washer nozzle sub-assembly to the washer hose.

    2. A01JB35E01

      Engage the 2 claws and install the washer nozzle sub-assembly as shown in the illustration.

  2. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. With the engine running, check the position that the washer fluid hits the windshield.

      Standard
      Washer fluid hits the windshield in the areas shown in the illustration.
      A01JC56E01
      Standard Clearance
      Area Measurement Area Measurement
      A 95.8 mm (3.77 in.) B 323.6 mm (1.06 ft.)
      C 161.4 mm (6.35 in.) D 155.7 mm (6.13 in.)
      E 443.7 mm (1.46 ft.) F 546.6 mm (1.79 ft.)
      G 208.2 mm (8.20 in.) H 82.1 mm (3.23 in.)
      Text in Illustration
      *1 Upper Limit *2 Standard
      *3 Lower Limit - -

      Tech Tips

      If the result is not as specified, replace the malfunctioning washer nozzle sub-assembly.

  3. ADJUST WASHER NOZZLE SUB-ASSEMBLY


    1. Select a washer nozzle so that the contact area is within the standard. Replace the washer nozzle with the selected one.

      A01JB14E02
      Text in Illustration
      *a Available Washer Nozzles *b Washer Fluid Spray Angle
      *c Part Number - -