WIPER ECU INSTALLATION


  1. INSTALL WINDSHIELD WIPER RELAY ASSEMBLY


    1. A01JDAS

      Install the windshield wiper relay assembly with the bolt.

    2. Connect the connector.

  2. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Radio Receiver)


    1. A01JADX

      Engage the 4 claws to install the center instrument cluster finish panel sub-assembly.

  3. INSTALL RADIO TUNER OPENING COVER WITH BRACKET (w/o Radio Receiver)


    1. A01JBMF

      Install the radio tuner opening cover with bracket with the 4 bolts <B>.

  4. INSTALL RADIO RECEIVER WITH BRACKET (w/ Radio Receiver)


    1. Connect each connector.

    2. A01J9D0

      Engage the 4 claws as shown in the illustration.

    3. A01JD1M

      Install the radio receiver with bracket with the 4 bolts.

  5. INSTALL NAVIGATION RECEIVER WITH BRACKET (w/ Navigation System)


    1. A01JAM5

      Engage the 4 claws to temporarily install the navigation receiver assembly with bracket as shown in the illustration.

    2. A01JCMN

      Install the navigation receiver assembly with bracket with the 4 bolts.

  6. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


    1. A01JD4M

      Connect the connector.

    2. Engage the 3 claws to install the upper instrument panel finish panel sub-assembly.

  7. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH


    1. Connect the connector.

    2. Engage the 14 claws to install the instrument cluster finish panel garnish.

      A01J8FE

  8. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01J96O

      Engage the 7 claws and 2 clips to install the lower center instrument cluster finish panel sub-assembly.

  9. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. A01JCDA

      Connect each connector.

    2. Engage the 6 claws to install the integration control and panel assembly.

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Navigation System for HDD)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  11. INSTALL REAR NO. 3 FLOOR BOARD (w/ Navigation System for HDD)


    1. A01JC33

      Engage the 2 guides to install the rear No. 3 floor board.

  12. INSTALL REAR DECK FLOOR BOX (w/ Navigation System for HDD)


    1. Install the rear deck floor box.

  13. INSTALL REAR NO. 2 FLOOR BOARD (w/ Navigation System for HDD)


    1. A01JCWRE01

      Engage the 3 guides <A>.

    2. Engage the 2 guides <B> and install the rear No. 2 floor board as shown in the illustration.