WIPER SWITCH REMOVAL


  1. REMOVE LOWER STEERING COLUMN COVER

    Note

    Removing the lower steering column cover in the incorrect order will cause the lower steering column cover to break.


    1. Release the tilt and telescopic lever, and fully extend and lower the steering column assembly.

    2. Lock the tilt and telescopic lever.

    3. A01JCNK

      Push the right and left sides of the lower steering column cover to disengage the 4 claws.

    4. A01JADT

      Insert fingers into the opening of the tilt lever of the lower steering column cover to disengage the claw.

      Tech Tips

      Spread the claw to disengage it.

    5. A01JAR1E01
      Text in Illustration
      *1 Protective Tape

      Turn the steering wheel assembly to the right.

    6. Using a screwdriver, disengage the claw as shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    7. A01JCKZE01
      Text in Illustration
      *1 Protective Tape

      Turn the steering wheel assembly to the left.

    8. Using a screwdriver, disengage the claw as shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    9. A01JCPP

      Remove the lower steering column cover as shown in the illustration.

  2. REMOVE UPPER STEERING COLUMN COVER


    1. A01JD64

      Disengage the claw and 2 pins, and remove the upper steering column cover.

  3. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    1. Turn the steering wheel assembly to the right.

    2. A01JBXR

      Disconnect the 2 connectors.

    3. Disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.

      Note

      If the claw is pushed with excessive force, it may break.