REAR WIPER MOTOR REMOVAL


  1. REMOVE UPPER BACK DOOR TRIM PANEL ASSEMBLY


    1. A01JDBJ

      Using a moulding remover, disengage the 4 clips and 4 claws, and remove the upper back door trim panel assembly.

  2. REMOVE BACK DOOR SIDE GARNISH RH


    1. A01JBBG

      Disengage the 3 clips and 2 claws, and remove the back door side garnish RH.

  3. REMOVE BACK DOOR SIDE GARNISH LH


    1. A01JD5B

      Disengage the 3 clips and 2 claws, and remove the back door side garnish LH.

  4. REMOVE BACK DOOR TRIM BOARD ASSEMBLY


    1. A01JC1S

      Using a moulding remover, disengage the clip and claw.

    2. A01JD3V

      Using a moulding remover, disengage the clip and claw.

    3. A01JA9PE01

      Disengage the 3 clips in the order shown in the illustration.

    4. A01J91Z

      Disengage the 2 clips by pulling the back door trim board assembly in the direction indicated by the arrows in the illustration.

    5. A01JC5YE01
      Text in Illustration
      *1 Back Door Trim Board Assembly
      *2 Back Door Panel
      *a The portion that may be damaged due to interference

      Remove the back door trim board assembly by pulling it in the direction indicated by the arrow in the illustration to disengage the 4 clips.

      Note

      Make sure to pull the back door trim board assembly in the direction indicated by the arrow in the illustration. If the back door trim board assembly is removed from the lower part, the door pull handle mounting area may interfere with the back door panel, resulting in damage to the back door trim board assembly.

  5. REMOVE BACK DOOR TRIM BOARD


    1. A01JD91

      Disengage the 5 clips and 2 guides, and remove the back door trim board.

  6. REMOVE REAR WIPER ARM HEAD CAP (w/ Resin Wiper Arm)


    1. A01JBJ0

      Disengage the 2 claws and open the rear wiper arm head cap as shown in the illustration.

    2. A01J8M3

      Disengage the 2 claws and remove the rear wiper arm head cap.

  7. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY


    1. w/ Resin Wiper Arm:


      1. A01JBGH

        Remove the nut, and the rear wiper arm and blade assembly.

    2. w/ Steel Wiper Arm:


      1. A01JCGFE01
        Text in Illustration
        *1 Rear Wiper Arm Head Cap

        Open the rear wiper arm head cap.

      2. Remove the nut and the rear wiper arm and blade assembly.

  8. REMOVE REAR WIPER MOTOR GROMMET


    1. A01JAYS

      Remove the rear wiper motor grommet.

  9. REMOVE REAR WIPER MOTOR ASSEMBLY


    1. A01JBIF

      Disconnect the connector.

    2. Remove the 3 bolts and the rear wiper motor assembly.