WASHER NOZZLE (for Front Side) ADJUSTMENT


  1. REMOVE WASHER NOZZLE SUB-ASSEMBLY


    1. A01JD96E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.

      Note


      • Be careful not to damage the windshield.

      • Washer nozzles cannot be reused.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01JAP3

      Remove the washer nozzle sub-assembly from the washer hose.

  2. ADJUST WASHER NOZZLE SUB-ASSEMBLY


    1. Select a washer nozzle so that the contact area is within the standard. Replace the washer nozzle with the selected one.

      A01JB14E02
      Text in Illustration
      *a Available Washer Nozzles *b Washer Fluid Spray Angle
      *c Part Number - -

  3. INSTALL WASHER NOZZLE SUB-ASSEMBLY


    1. A01JAP3

      Connect a new washer nozzle sub-assembly to the washer hose.

    2. A01JB35E01

      Engage the 2 claws and install the washer nozzle sub-assembly as shown in the illustration.