WASHER MOTOR (for Rear Side) REMOVAL


  1. REMOVE FRONT WHEEL RH

  2. REMOVE FRONT FENDER LINER RH


    1. A01J8ZFE01

      Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

    2. A01JBM4

      Remove the 10 clips and 4 screws.

    3. Using a clip remover, remove the grommet and the front fender liner RH.

      Tech Tips

      The grommet needs to be replaced with new one because it will break when it is removed.

  3. DRAIN WASHER FLUID


    1. A01J8S3

      Disconnect the washer hose from the rear washer motor and pump assembly, and drain the washer fluid.

      Tech Tips

      Use a container to collect the washer fluid.

  4. REMOVE REAR WASHER MOTOR AND PUMP ASSEMBLY


    1. A01J93D

      Disconnect the connector.

    2. Remove the rear washer motor and pump assembly.