WASHER MOTOR (for Front Side) REMOVAL


  1. REMOVE FRONT WHEEL RH

  2. REMOVE FRONT FENDER LINER RH


    1. A01J8ZFE01

      Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

    2. A01JBM4

      Remove the 10 clips and 4 screws.

    3. Using a clip remover, remove the grommet and the front fender liner RH.

      Tech Tips

      The grommet needs to be replaced with new one because it will break when it is removed.

  3. DRAIN WASHER FLUID


    1. A01J8HH

      Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

      Tech Tips

      Use a container to collect the washer fluid.

  4. REMOVE FRONT WASHER MOTOR AND PUMP ASSEMBLY


    1. A01JBDU

      Disconnect the connector.

    2. Remove the windshield washer motor and pump assembly.