HOOD DISASSEMBLY


  1. REMOVE HOOD AUXILIARY CATCH HOOK ASSEMBLY


    1. A01JDAY

      Remove the 2 bolts and hood auxiliary catch hook assembly.

  2. REMOVE HOOD INSULATOR


    1. A01JCD8

      Using a clip remover, remove the 6 clips and hood insulator.

  3. REMOVE WASHER NOZZLE SUB-ASSEMBLY


    1. A01JD96E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.

      Note


      • Be careful not to damage the windshield.

      • Washer nozzles cannot be reused.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01JAP3

      Remove the washer nozzle sub-assembly from the washer hose.

  4. DISCONNECT WASHER HOSE ASSEMBLY


    1. A01JBEZ

      Using a clip remover, disengage the 6 clips and disconnect the washer hose assembly.

  5. REMOVE HOOD STAY HOLDER


    1. A01JD4J

      Disengage the 2 claws and remove the hood stay holder.

  6. REMOVE HOOD SUPPORT ROD


    1. A01JCGQ

      Disengage the 3 claws and remove the hood support rod.

  7. REMOVE HOOD STAY BRACKET


    1. A01J9U5

      Remove the bolt and hood stay bracket.