REAR POWER WINDOW SWITCH INSPECTION


  1. INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (for LH Side)


    1. A01J8NZE02
      Text in Illustration
      *1

      Component without harness connected

      (to Power Window Regulator Switch Assembly (for Rear LH Side))

      Check the switch function.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        6 (UP) - 1 (GND) Auto up or up position Below 1 Ω
        7 (DOWN) - 1 (GND) Auto down or down position Below 1 Ω
        8 (AUTO) - 1 (GND) Auto up or auto down position Below 1 Ω
        6 (UP) - 1 (GND) Free 10 kΩ or higher
        7 (DOWN) - 1 (GND) Free 10 kΩ or higher
        8 (AUTO) - 1 (GND) Free 10 kΩ or higher

        If the result is not as specified, replace the power window regulator switch assembly (for rear LH side).

    2. A01J8NZE07
      Text in Illustration
      *1

      Component without harness connected

      (to Power Window Regulator Switch Assembly (for Rear LH Side))
      *2 LED

      Check that the LED illuminates.


      1. Apply battery voltage to the power window regulator switch assembly and check that the LED illuminates.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 4 (LED)

        Battery negative (-) → 1 (GND)

        		 LED illuminates

        If the result is not as specified, replace the power window regulator switch assembly (for rear LH side).

  2. INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (for RH Side)


    1. A01J8NZE02
      Text in Illustration
      *1

      Component without harness connected

      (to Power Window Regulator Switch Assembly (for Rear RH Side))

      Check the switch function.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        6 (UP) - 1 (GND) Auto up or up position Below 1 Ω
        7 (DOWN) - 1 (GND) Auto down or down position Below 1 Ω
        8 (AUTO) - 1 (GND) Auto up or auto down position Below 1 Ω
        6 (UP) - 1 (GND) Free 10 kΩ or higher
        7 (DOWN) - 1 (GND) Free 10 kΩ or higher
        8 (AUTO) - 1 (GND) Free 10 kΩ or higher

        If the result is not as specified, replace the power window regulator switch assembly (for rear RH side).

    2. A01J8NZE07
      Text in Illustration
      *1

      Component without harness connected

      (to Power Window Regulator Switch Assembly (for Rear RH Side))
      *2 LED

      Check that the LED illuminates.


      1. Apply battery voltage to the power window regulator switch assembly and check that the LED illuminates.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 4 (LED)

        Battery negative (-) → 1 (GND)

        		 LED illuminates

        If the result is not as specified, replace the power window regulator switch assembly (for rear RH side).