ROOF HEADLINING DISASSEMBLY


  1. REMOVE VANITY LIGHT ASSEMBLY


    1. Remove the vanity light assembly Click here.

      Tech Tips

      Use the same procedure for the other vanity light.

  2. REMOVE NO. 2 ROOF SILENCER PAD (w/o Sliding Roof)


    1. Remove the No. 2 roof silencer pad from the roof headlining assembly.

      A01JAZ3

  3. REMOVE NO. 3 ROOF SILENCER PAD (w/o Sliding Roof)


    1. Remove the No. 3 roof silencer pad from the roof headlining assembly.

      A01JAWQ

  4. REMOVE NO. 4 ANTENNA CORD SUB-ASSEMBLY


    1. Peel the strips of the tape used to secure the antenna cord only to the extent that allows removal of the antenna cord.

      A01J92CE01

    2. Remove the No. 4 antenna cord sub-assembly.

  5. REMOVE NO. 1 ROOF WIRE


    1. Remove the adhesive tape from the roof headlining assembly.

      A01JBV7E01
      Text in Illustration
      *1 Adhesive Tape - -

    2. Turn the visor connectors counterclockwise approximately 45° and separate the connectors and each clamp from the roof headlining assembly.

    3. Remove the No. 1 roof wire from the roof headlining assembly.

      A01JCJFE01
      Text in Illustration
      *1 w/ EC Mirror *2 w/ Rain Sensor