REMOVE NO. 3 HEATER TO REGISTER DUCT
Remove the 3 screws <C> and No. 3 heater to register duct.
REMOVE NO. 2 HEATER TO REGISTER DUCT
Remove the 3 screws <C> and No. 2 heater to register duct.
REMOVE NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)
Disengage the 5 clamps.
Remove the 2 screws and navigation antenna assembly.
REMOVE AUTOMATIC LIGHT CONTROL SENSOR
Disconnect the connector.
Disengage the 2 claws and remove the automatic light control sensor.
REMOVE NO. 2 INSTRUMENT PANEL WIRE (for LHD)
Disconnect the connector.
Disengage the 2 claws and each clamp, and remove the No. 2 instrument panel wire.
REMOVE NO. 2 INSTRUMENT PANEL WIRE (for RHD)
Disconnect the connector.
Disengage the 2 claws and each clamp, and remove the No. 2 instrument panel wire.
REMOVE NO. 5 INSTRUMENT PANEL WIRE
Disengage the 2 clamps and remove the No. 5 instrument panel wire.
REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
Remove the 5 screws <C> and instrument cluster finish panel assembly.
REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY
Remove the 3 screws <C> and center instrument panel register assembly.
REMOVE METER HOOD SPACER
Remove the 2 screws <C> and meter hood spacer.
REMOVE FRONT PASSENGER AIRBAG ASSEMBLY
CAUTION:
When storing the front passenger airbag assembly, keep the airbag deployment side facing upward.
Remove the 2 screws and 2 clamps.
Lean the instrument panel and disengage the 3 hooks as shown in the illustration.
Disengage the 3 hooks to remove the front passenger airbag assembly from the instrument panel safety pad assembly as shown in the illustration.
REMOVE NO. 1 INSTRUMENT PANEL CUSHION
Remove the No. 1 instrument panel cushion.
REMOVE INSTRUMENT PANEL CUSHION
Remove the instrument panel cushion.
REMOVE NO. 2 INSTRUMENT PANEL CUSHION
Remove the No. 2 instrument panel cushion.
REMOVE NO. 4 INSTRUMENT PANEL CUSHION
Remove the No. 4 instrument panel cushion.
REMOVE NO. 5 INSTRUMENT PANEL CUSHION
Remove the No. 5 instrument panel cushion.