FRONT EVAPORATOR TEMPERATURE SENSOR REMOVAL


  1. REMOVE AIR CONDITIONING UNIT ASSEMBLY

    Tech Tips

    Refer to the procedure for Remove Air Conditioning Unit Assembly Click here.

  2. REMOVE BLOWER ASSEMBLY


    1. w/o PTC Heater:


      1. Disconnect the connector.

      2. Disengage the 3 screws and guide, and remove the blower assembly.

        A01J8LD

    2. w/ PTC Heater:


      1. Remove the screw and disconnect the quick heater connector.

      2. Disconnect the connector and disengage each clamp.

      3. Disengage the 3 screws and guide, and remove the blower assembly.

        A01J8OOE01
        Text in Illustration
        *1 Quick Heater Connector - -

  3. REMOVE COOLER EXPANSION VALVE


    1. A01JBSF

      Using a 4 mm hexagon wrench, remove the 2 hexagon bolts and cooler expansion valve.

  4. REMOVE COOLER EVAPORATOR SUB-ASSEMBLY


    1. A01JBTO

      Remove the packing.

      Note

      Remove the packing carefully because it will be reused.

    2. A01JAVZ

      Remove the 4screws.

    3. Disengage the 4 claws and remove the lower heater case.

    4. A01J9RD

      Disengage the clamp and remove the cooler evaporator sub-assembly with the No. 1 cooler thermistor.

    5. A01J8ET

      Remove the 2 O-rings from the cooler evaporator sub-assembly.

  5. REMOVE NO. 1 COOLER THERMISTOR


    1. A01J8V5

      Remove the No. 1 cooler thermistor.