AIR CONDITIONING SYSTEM OPERATION CHECK


  1. OPERATION CHECK OF REMOTE AIR CONDITIONING SYSTEM

    Tech Tips

    The remote air conditioning system does not operate unless the required operating conditions are met. Therefore, confirm that the operating conditions are met before performing the inspection Click here.


    1. Activation Control Check


      1. Press and hold the remote A/C switch on the key (electrical transmitter) once for 1 seconds or more to start the air conditioning system.

        Tech Tips

        The wireless door lock system locks all doors before the remote air conditioning system is activated.

    2. Operation Check


      1. Check that the remote air conditioning system operates for a maximum of 3 minutes.

        Tech Tips

        The operating time differs depending on the HV battery state of charge.

    3. Stop Control Check


      1. Press the remote A/C switch on the key (electrical transmitter) twice briefly within 3 seconds to stop the remote air conditioning system.

        Tech Tips


        • When any of the operating conditions are not met during remote air conditioning system operation, the remote air conditioning system will stop.

        • When 3 minutes have elapsed after the remote air conditioning system was started, the remote air conditioning system will stop. Some operating conditions may result in the remote air conditioning system being stopped before 3 minutes elapses.

    4. Operation Check of the Remote A/C Switch on the Key (Electrical Transmitter)

      Note


      • Use 2 keys (electrical transmitters).

      • Confirm that the wireless door lock functions operate normally.


      1. A01JA9NE01

        Prepare 2 registered keys (electrical transmitters), and label one of them key (electrical transmitter) A, and the other key (electrical transmitter) B.

      2. Operate the remote A/C switch on key (electrical transmitter) A and check that the remote air conditioning system can be operated.

      3. Operate the remote A/C switch on key (electrical transmitter) B and check that the remote air conditioning system can be operated.

        Tech Tips


        • If the remote air conditioning system is not operated for both keys (electrical transmitters) A and B, the remote air conditioning system may have a malfunction Click here.

        • If the remote air conditioning system is not operated for one of the keys (electrical transmitter) A or B, the key (electrical transmitter) needs to be replaced because a malfunction of the remote A/C switch on the key (electrical transmitter) is suspected.