REAR CENTER SEAT OUTER BELT ASSEMBLY INSTALLATION


  1. INSTALL REAR CENTER SEAT BELT ASSEMBLY


    1. A01J8GUE01
      Text in Illustration
      *1 Protruding Part

      Install the rear center seat belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the rear center seat belt assembly to overlap the protruding part of the rear seat back frame.

  2. INSTALL REAR SEATBACK COVER WITH PAD RH


    1. Temporarily install the rear seatback cover with pad RH.

    2. A01J8H0

      Engage the 4 claws and install the 2 rear seat headrest supports.

    3. A01J9PE

      Engage the 4 claws and install the 2 rear seat center headrest supports.

    4. A01J8PLE01

      Move the rear seat shoulder belt hole cover in the direction indicated by the arrow in the illustration to engage the 2 claws (A).

    5. Move the rear seat shoulder belt hole cover in the direction indicated by the arrow in the illustration to disengage the 2 claws (B) and remove the cover.

    6. A01J9PR

      Engage the 2 claws and install the seat belt anchor cover cap.

    7. A01J98I

      Using hog ring pliers, install 16 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    8. A01JB25

      Engage the 6 clips and Install the rear seatback cover with pad RH with the 3 clips.

  3. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY


    1. A01JCZZ

      Install the bush.

    2. A01JD9E

      Insert the pin into the rear seatback.

    3. Install the rear seat center armrest assembly with the bolt and bush.

  4. INSTALL CENTER ARMREST HINGE COVER


    1. A01JCAH

      Engage the claw and install the center armrest hinge cover as shown in the illustration.

  5. INSTALL REAR SEATBACK STOP BUTTON GROMMET


    1. A01J98C

      Engage the 3 claws and install the rear seatback stop button grommet.

  6. INSTALL REAR SEAT SHOULDER BELT GUIDE RH


    1. A01J9PJ

      Engage the guide and install the rear seat shoulder belt guide RH with the 2 screws.

  7. INSTALL REAR SEATBACK COVER RH


    1. A01J9G8

      Engage the 4 claws and install the rear seatback cover RH.

  8. INSTALL REAR SEATBACK CENTER COVER (for LHD)


    1. A01J9TU

      Engage the 4 claws and install the rear seatback center cover.

  9. INSTALL REAR SEATBACK ASSEMBLY RH


    1. Place the rear seatback assembly RH in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. A01JCEH

      Install the rear seatback assembly RH with the 2 bolts.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }
    3. A01JBDDE01
      Text in Illustration
      *1 Fastener

      Engage the fastener.

  10. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY


    1. A01JCP6

      Install the rear seat center headrest assembly as shown in the illustration.

  11. INSTALL REAR SEAT HEADREST ASSEMBLY RH


    1. A01J8ZG

      Install the rear seat headrest assembly RH as shown in the illustration.

  12. CONNECT REAR CENTER SEAT BELT ASSEMBLY


    1. A01JAONE01
      Text in Illustration
      *1 Protruding Part

      Connect the anchor part of the rear seat inner belt assembly.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the rear center seat belt assembly to overlap the protruding part of the rear seat inner belt assembly RH.

  13. INSTALL REAR SEAT CUSHION ASSEMBLY


    1. A01JCUFE01
      Text in Illustration
      *1 100 mm (3.94 in.) or less
      *2 Guide
      *3 Hook

      Engage the 2 guides of the seat cushion to the seatback.

    2. Engage the 2 front hooks of the seat cushion to the vehicle body.

      Note

      When installing the seat cushion, make sure that the seat belt buckle is not under the seat cushion.

      Tech Tips

      Confirm that the seat cushion is firmly installed.