REAR CENTER SEAT OUTER BELT ASSEMBLY REMOVAL


  1. REMOVE REAR SEAT CUSHION ASSEMBLY


    1. A01JC67E01
      Text in Illustration
      *1 100 mm (3.94 in.) or less
      *2 Hook
      *3 Guide

      Disengage the 2 front hooks of the seat cushion from the vehicle body as shown in the illustration.

      Note

      Follow the instructions below carefully as the cushion frame deforms easily.


      1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.

      2. Repeat the above procedure for the other hook.

    2. Disengage the 2 guides of the seat cushion from the seatback.

    3. Remove the rear seat cushion assembly.

  2. DISCONNECT REAR CENTER SEAT BELT ASSEMBLY


    1. A01J9L0

      Remove the bolt and disconnect the anchor part of the rear center seat belt assembly.

  3. REMOVE REAR SEAT HEADREST ASSEMBLY RH


    1. A01J8WD

      Press the headrest support button and pull up the rear seat headrest assembly RH as shown in the illustration.

  4. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY


    1. A01JBGP

      Press the headrest support button and pull up the rear seat center headrest assembly as shown in the illustration.

  5. REMOVE REAR SEATBACK ASSEMBLY RH


    1. Fold the rear seatback assembly RH forward.

    2. A01JBDDE01
      Text in Illustration
      *1 Fastener

      Disengage the fastener.

    3. A01JCEH

      Remove the 2 bolts and rear seatback assembly RH.

  6. REMOVE REAR SEATBACK CENTER COVER (for LHD)


    1. A01J9TU

      Disengage the 4 claws and remove the rear seatback center cover.

  7. REMOVE REAR SEATBACK COVER RH


    1. A01J9G8

      Disengage the 4 claws and remove the rear seatback cover RH.

  8. REMOVE REAR SEAT SHOULDER BELT GUIDE RH


    1. A01J9PJ

      Remove the 2 screws.

    2. Disengage the guide and remove the rear seat shoulder belt guide RH.

  9. REMOVE REAR SEATBACK STOP BUTTON GROMMET


    1. A01J98C

      Disengage the 3 claws and remove the rear seatback stop button grommet.

  10. REMOVE CENTER ARMREST HINGE COVER


    1. A01J9QLE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, disengage the claw and remove the center armrest hinge cover as shown in the illustration.

  11. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY


    1. A01JD9E

      Remove the bolt and bush.

    2. Separate the pin and remove the center armrest assembly.

    3. A01JCZZ

      Remove the bush.

  12. REMOVE REAR SEATBACK COVER WITH PAD RH


    1. A01JB25

      Using a clip remover, remove the 3 clips.

    2. Disengage the 6 clips.

    3. A01J8IB

      Remove the 16 hog rings.

    4. Disengage the guide and remove the rear seat shoulder belt guide RH.

    5. A01J9PR

      Disengage the 2 claws and remove the seat belt anchor cover cap.

    6. A01JB52E01

      Move the rear seat shoulder belt hole cover in the direction indicated by the arrow in the illustration to disengage the 2 claws (A).

    7. Move the rear seat shoulder belt hole cover in the direction indicated by the arrow in the illustration to disengage the 2 claws (B) and remove the cover.

    8. A01J9PE

      Disengage the 4 claws and remove the 2 rear seat center headrest supports.

    9. A01J8H0

      Disengage the 4 claws and remove the 2 rear seat headrest supports.

    10. Remove the rear seatback cover with pad RH from the rear seatback frame sub-assembly RH.

  13. REMOVE REAR CENTER SEAT BELT ASSEMBLY


    1. A01JB7W

      Remove the nut and rear center seat belt assembly.